UGears Aviator Wooden 3D Model 15828
UGears Aviator Wooden 3D Model 15829
UGears Aviator Wooden 3D Model 15830
UGears Aviator Wooden 3D Model 15831
UGears Aviator Wooden 3D Model 15832
UGears Aviator Wooden 3D Model 15833
UGears Aviator Wooden 3D Model 15834
UGears Aviator Wooden 3D Model 15835

UGears Aviator

out of 5
6 Review(s)
SKU: 4820184120839

$83.99

Find it for less? We Price Match!

UGears Aviator: the very first flying machine model in UGears transportation vehicles collection.

Are you dreaming of the sky?  Fascinated by aircraft or simply a fan of aeronautics?  Then, the Aviator model is just what you need.  Become a flight navigator and a pilot and make your dreams come true with this exciting 3-in-1 set.

Consisting of 3 separate modules; the flight control tower, the helicopter and the airplane; this model is great for beginner pilots and for experienced old-timers.  The control tower is used to launch and navigate aircraft, set them into roll and pitch modes and control speed and motion.  Choose one of two aircraft, attach it onto the tower bar and you are good to go.  Start with the helicopter, if you are a beginner pilot. Easier to control and manipulate, the helicopter has all the basic elements of a real aircraft: three-blade main and tail rotors, a cockpit with opening doors and a landing gear.

The airplane module has a higher velocity and requires more skills to operate.  It’s designed is based on a prototype of wire-braced airplanes, with a 5-piston motor and may require a couple hours of flight training. Whichever wayward bird you choose to fly, the Control Tower is your cockpit and the main navigation device.  Its high-performance motor powers the swashplate, with the attached bar, that is used to connect the airplane on one side and has a balance weight on the other.  Get your flying helmet on…hold onto the wheel and get ready to become airborne! With UGears Aviator, the sky is your limit!

Complete Your Set:

UGears Archballista-Tower, UGears Tower Windmill

Out of stock

How UGears Aviator Works

The Aviator is a 3-in-1 wooden mechanical model, that is also a 3-D puzzle.  After the assembly is complete, it becomes a fully-functioning, hand-operating toy, suitable for both kids and adults.

The control tower is the model’s operating mechanism that has two control bars: the control column, that regulates the roll and pitch, and the motor controller, that adjust the speed of aircraft.

After all the modules are assembled and your aircraft is in place, it’s time to wind up the operating tower motor.  It takes no more than 25 turns for a full wind.  To lunch, either one of your flying machines, release the motor’s controller lock, while holding onto the control column and aim for the sky!

UGears Aviator Video

Aviator DETAILS AND SPECIFICATIONS

Weight: 3.5 lbs

Dimensions: 15 × 7 × 2 in

Assembled size:
Estimated time of assembly:
Difficulty level:
Number of parts:
Tools and materials:
Recommended Age:

HOW TO MAKE UGears Aviator

pdf-instruction-ugears-models-us PDF Instruction
Ugears - NATURAL - Made of woo
NATURAL

Made of wood

Ugears - NO GLUE CONNECTION
NO GLUE CONNECTION

Assembling without glue and chemicals

Ugears - SELF ASSEMBLY
SELF ASSEMBLY

Details are already cut and ready to assemble

Ugears - MECHANICAL - The models produce motion
MECHANICAL

The models produce motion

What others are saying

Overall Rating
4.8
(6 Reviews)
100% would recommend this product
Rating
5 Stars
5 Reviews
4 Stars
1 Reviews
3 Stars
0 Reviews
2 Stars
0 Reviews
1 Stars
0 Reviews
Overall Experience
Play Experience
Level of Difficulty
4
Value for Money
4
Please note that by submitting a helpfulness vote on a review your IP address is collected and stored by our trusted third party service provider for the sole purpose of preventing multiple entries from the same IP address. To see how to control your personal data, please see our Privacy policy.

Reviews

  1. 2 years ago
    4
    WOW ?
    UGears Aviator |
    65 or older
    I would recommend this to a friend!
    THIS WAS MY 5TH UGEARS PROJECT AND CERTAINLY THE HARDEST. DESIGN AND ENGINEERING ARE SUPERB BUT PLYWOOD QUALITY WAS SUB-STANDARD AND RESULTED IN SEVERAL BROKEN PARTS INCLUDING DRIVE GEARS FOR WHICH THERE WERE NO SPARES, A COUPLE OF BEARING, THE HELICOPTER LEFT BODY PANEL, ETC. IN SEVERAL CASES THE PLYWOOD DE-LAMINATED EITHER WHEN REMOVING FROM THE FRAME OR WHEN ATTEMPTING TO INSERT PARTS IN HOLES. THIS WAS DEFINITELY NOT THE SAME GRADE OF PLYWOOD USED IN MY U11 TRUCK OR MY OTHER MODELS. i WAS ABLE TO GLUE BROKEN PARTS AND ACHEIVE A WORKING MACHINE BUT IT WAS NOT EASY.
    Read More
    Was this review helpful?
    0
    0
    Level of Difficulty
    4
    Value for Money
    4
    Build Time: 15 hrs
    Building Experience: Advanced UGears Builder
  2. 4 years ago
    5
    UGears Aviator
    I would recommend this to a friend!
    This is a good kit to spend your retiring years as a model builder who has been building model air craft for more years than I can remember now I can not do that due to health reasons and the glue,I am 88 years of age and have finished the kit and am moving on to the NEW dream car. Thanks for something different.
    Read More
    Was this review helpful?
    3
    0
  3. 5 years ago
    5
    UGears Aviator
    I would recommend this to a friend!
    My teenage son wants to go into mechanics when he goes to college. I bought him this gift for his birthday. I can’t wait to see the look of delight when he opens his gift.
    Read More
    Was this review helpful?
    1
    1
  4. 5 years ago
    5
    UGears Aviator
    I would recommend this to a friend!
    I’ve built various models of one kind or another for nearly 60 years. I bought the UGears Aviator on Kickstarter and was astonished at the level of engineering in this kit. This was my second kit (I built the Trimaran a couple of weeks ago). The Aviator took me roughly 30 hours to assemble it, but the instructions were clear, the pieces precise, and the overall assembly as imagined. The engineering is about the best I’ve seen in a wooden model. I can only imagine how this was developed, but the final product is astonishing. And it worked the first time! I did have to use super glue in a couple of places to reinforce or fix problems, but it was minimal. This is not a weekend project for a 10-year old; but if you like a challenge, have the patience, and want to see something amazing, UGears has a kit for you!
    Read More
    Was this review helpful?
    3
    0
  5. 5 years ago
    5
    UGears Aviator
    I would recommend this to a friend!
    I am have always been fascinated with aerial contraptions. UGears Aviator has brought back one of my most precious childhood likings into my hands. I love how I can always keep this memory close to home; and to my heart!
    Read More
    Was this review helpful?
    1
    0
  6. 5 years ago
    5
    UGears Aviator
    I would recommend this to a friend!
    My nephew loves airplanes. He has since he was a kid. I’m glad that I found the perfect birthday gift for him. I also love how the process of building the model captures people’s attention the same way it did with my nephew.
    Read More
    Was this review helpful?
    0
    0