Sky Watcher Tourbillon Table Clock

What to say... another great model, which provides some difficulties to solve. I added a youtube video.
Unluckily I had to ask for a replacement part, because I forgot to block the main drive, while fiddling with the tourbillion. (Reseating and regreasing the impulse pin axle, add metal spacers to reduce friction etc.)
Although UGEARS does not charge for such a replacement, customs had me pay 13€, but what the heck...

I actually learned what a tourbillion does and how and that it is a real masterpiece of clock work (only the enhancement that the inventor hoped to reach was not THAT huge and using tourbillions in a watch has been ceased)

Really fun build!!! Took a relaxing and “moderately focused” 15 hours to make.

I’ve always wondered how tourbillon watch mechanisms work but just graduated college so they’re way out of budget lol. Anyway, I stumbled upon this on instagram and thought it’d be a fun way to learn.

While I was skeptical on how well it’d actually work and the quality, the clock was exceptionally well made. Creative mechanisms, thick plywood, runs for 2-3hrs, and satisfying tik-tok sound.

Will definitely be a repeat customer for other products. Lastly, proud to support companies from Ukraine 🇺🇦

Excellent quality of all parts: They fit perfectly and everything is very stable. You will profit from a small hammer, though. Bee wax is essential for getting the clock to work automatically.

I have never done something similar before but the manual is a very good guidance almost everywhere. I only made two small mistakes and found one imprecise picture which rendered the transmission to the minutes and hours wheels unworkable. The image I uploaded gives you some hints. But I even enjoyed partly disassembling the clock to somewhere in the middle - and the process worked fine also backwards ;-).

I always played around with the larger assemblies for quite some time (like when you have just mounted the minutes wheel, the hours wheel, or the tourbillon) not just to distribute the wax on the gears but also to check whether the mechanism makes sense and works correctly, e.g., wheels turn in the right directions, or lining up the impulse pin and escape fork thru the two levers managing the balance spring. You will need the latter many times when setting the clock mechanism in motion :)

The last action might be really difficult if you have no idea how a mechanical clock works internally so you might want to check out some YouTube videos on how the escape wheel and all the other parts of the escapement interact.

As I did not put any time pressure on my work, it was an extremely enjoyable experience with a great reward in the end when the clock worked automatically (for a few minutes b/c the transmission of power from the watch's mainspring barrel to the escapement was too weak in my case).

Now I contemplate fixing the last minor detail during the next longer vacation period...!

Finally I've got this excellent and beautiful model to work. After carefully building the clock it used to work always for some minutes then the escape fork hit the escape wheel from above, causing the whole thing to get stuck. I don't know if this was caused by my build, but I knew, I would have to fix it.

Some research taught me that the impulse pin would not provide enough energy to the escape fork, which then was too slow compared to the movement of the escape wheel.

I had to rework the inner and outer mount of the balance spring. On the inside the spring was mounted in an incorrect angle, causing the spring to touch the inner mount, so I bent it to a proper position. On the outside the spring was several centimetres too long, so I shortened it just by letting it stick out on the back side of the mount. To avoid interference, I had to place the inner mount closer to the balance wheel.

Then I removed some vertical play on the metal axle and the escape fork mount using washers and also placed washers below some gears to reduce friction.

This whole process took me longer than the initial build, I rebuilt the tourbillon about 20 times, but it was great fun and worth every minute. Now the clock runs without any problems, it runs for about three hours before I have to wind it up again and keeps time very well.

I can recommend this model, but be aware this thing is an advanced build.

Definitely anadvanced build (not for the faint of heart)! This is my first Ugears project after doing six of a competitor brand. I find that the instructions weren't as detailed BUT the parts are much more sturdy. Actually thepanels are at least twice as thick.
I have it completed but I have a couple of gears jamming and Ihaven't found out whichones they are so it won't operate (annoying) but I will figure it out.
One other thing I discovered is that the "lock" is just a hair too long making catch on the drive gear!
Try it if you dare and want a challenge!

John

Fun project
Now if I can just get it to work. LoL

An excellent puzzle! A challenge to build and impressive to show off. Adequate instructions, easy to follow. Not for beginners though! And extreme care must be taken - this is very intricate puzzle, and demands full attention at all times. (I made one minor mistake: I installed the UGEARS logo backwards on the top part.) They point out that you need to seat the top tourbillon part. However, once it is completed, there is a breaking-in period: The first time it only ran a few seconds, but I kept restarting it and now it runs continuously.

seria conveniente que las piezas llevaran el nº marcado en cada pieza, ademas la puesta en marcha es terrorifica. y si no se siguen las pautas al pie der la letra estas muerto

Directions were substandard!

Another super UGears model.
A joy to build BUT to make sure every moving part or surface was sanded and well waxed.
On completion some trial and error to get the 'balance spring' to properly align with the impulse pin.
The clock is working but does stop after say 30 minutes. Not yet ventured to set the time. I will keep it running and slowly set up the time and see what happens.
Congratulations on designing such an intricate model

A very complex build. I had to make a couple of improvements to make it work much better. The escaoement spring was glued at the outer ends and the time adjustment arm has a piece of tooth pick glued on the top to stop the spring dropping out. I glued a small nut on top of the gravity bar which changes the hour. The Tourbillon central pin I shortened and added extra spacers which were greased. I felt that a second support would improve the rotation of the Tourbillon and why only one set of guide wheels. I've managed to get 3 hours 31 minutes without stopping but I think I can improve upon that. Take your time and make sure you use the metal washers and the candle wax sanding is also very important.

Realy tricky build. When it worked, it worked fine, but the hairspring end adjuster slips, and won't maintain the correct position for the escapment release paddle. This results in the assembly going out of phase, and stopping.

Runs like a baby. The instructions are not always detailed enough and mistakes can happen. It is however possible to disassemble without damage. The key is good lubrication. I found personally the application of only candle wax not sufficient, better to put on top of the wax layer a thin film of silicone grease. The clock runs continuously for about 3.5 hours.
The manual would benefit greatly if the design and function was explained in more detail, such as for an engineering manual.

Amazing build, intricate and a true look into the way complex mechanical clocks work. Problem is, it doesnt work. After completion the only way i got the escapement mechanism to move at all was by physically rotating the mainspring housing with my hand, and it stopped seconds after i let off pressure. After trying to fix it it now doesnt work at all, the escapement mechanism binds after a single rotation.

Beatiful, impressive, but i feel it may have been under tested in production. I dont have the time to tinker with it back and forth after i already spent so long building it to get it to work.

👍👍

Amazing, but you have to work extremely precise

The lenquige needs to bein nl to

Wow! This is a piece of art and I’m so grateful for this company and the fun we had putting this together. Such a work of craftsmanship!!

Me gusto mucho el armado del reloj, solo no me gusto el no poder ponerlo a trabajar como debería. No funciona

Sehr geehrte Damen und Herren,
Ich bin mit ihrem Produkt sehr zufrieden, nur leider sind bei der ersten Benutzung 2 Teile kaputt gegangen wodurch die Uhr leider nicht funktioniert. Wäre es möglich diese Teile nochmal als Ersatz zu bekommen?

Mit freundlichen Grüßen
Steven Döring

Amazing pieces, amazing escapement, wonderful

Just received my Ugears and looking forward to the build.

Hier passt Alles!

I have ordered from this company several times, and have always been very pleased with the items they make excellent presents, will order again from this company.

I assembled this model about three years ago, and I found it quite interesting from a technical point of view. I was pleased with the assembly process, but the design itself is very capricious and may not work the first time. I also could not set the exact speed of the clock, so I cannot use it for its intended purpose. However, the model is beautiful and it is pleasant to watch it work. I can recommend it.

PERFECTO